Skip to main content

Making a pendrive bootable using cmd

We have brought a very simple way to make your USB bootable. You can make it bootable in just few minutes.
Before starting the method you should a pendrive or usb and obviously a pc.

So lets began with the method.

1- Open command prompt on your pc by clicking on start then type cmd in the space provided. Now right click on it and click on 'Run as administrator'. Command prompt will be displayed on your screen.
2-Now you have to type DISKPART and then press Enter.
3-Type LIST DISK and press Enter.
4- Now you will see the number of disks which are connected to your pc and you have to select your disk which you want to make bootable.Type SELECT DISK #,where # means the number which is given to your disk.Probably disk 0 will be your hard disk drive and your pendrive may be DISK 1 or DISK 2 depending upon the connected devices.


 5- Now you have to follow the commands and you have to press Enter after each command.
        
    CLEAN
    CREATE PARTITION PRIMARY
    SELECT PARTITION 1
    ACTIVE
    FORMAT FS=FAT 32 QUICK
    ASSIGN
    EXIT

Note- You can replace FAT32 with NTFS depending upon your usb.

6- Now you have to only copy the files of window in your pendrive.

Congratulations,your pendrive is ready for booting a window.


ALTERNATE METHOD

There is a another way to make your usb bootable.This way is very simple and it requires less time also.

So lets start with the method.

1- You have to download a software named as RUFUS from internet.
2-When you will run this software then it will appear same as it is shown in the image below.


3- Now you have to browse for the iso file of the window which is placed in your pc and click on start.
4- After some minutes the process will be over then,click finsh.

Congratulations,your pendrive is ready for booting a window.
     

Comments

Popular posts from this blog

How to hack Andriod using Stagefright Vulnerability

Today i am going to demonstrate a exploit to take reverse shell in android,before i explain the demo i want to explain some things related to  this hack or exploit and also this for education and awareness about security of your devices.
What is Stagefright?
Android includes Stagefright, a media playback engine at the native level that has built-in software-based codecs for popular media formats.

Stagefright audio and video playback features include integration with OpenMAX codecs, session management, time-synchronized rendering, transport control, and DRM.

Stagefright also supports integration with custom hardware codecs provided by you. To set a hardware path to encode 
and decode media, you must implement a hardware-based codec as an OpenMax IL (Integration Layer) component.  

How hacker can exploit this Stagefright Library?
This critical vulnerability was discovered by a researcher at Cyber Security Firm called Zimperium. This  vulnerability is a type of buffer overflow attack and in thi…

The Best way to Track your Facebook Login Location and Receive the Login Alerts

I think about One-Fourth of the total world population is on Facebook and Whatsapp. Facebook hacking has become common so we all should look towards our safety so that no one else could use our account for something doing illegal purposes and we should know that when our account was last logged in and from which location.

By the Way Facebook provides both the Features for your Safety and has a lot of many Additional Features.When someone or you log in into your account, facebook notify you by sending you a message at your Registered Phone Number and your registered Email-ID.It also has a feature that you can see at which place you were last logged in.

Follow the Below Steps to Track your Facebook Login Location ::

1)First of all open up a browser and log in into your Facebook account.
2)At the Right most End below the Address Bar there will be a Down Arrow.Click on that arrow.
3)Now click on the Settings Option.Then Click on Security below the General option.
4)Now click on the Edit button …

How to Transfer Your Android SmartPhone to PC from Wifi Wirelessly The Best Way

Everybody in today's World is on Internet and they have become very Modern and Work Smartly in their life and make full use of the Internet to do their work more efficiently and Simply.
If you have a Android Smart Phone,What would you do if you want to see your mobile stuff on your Windows ?Buy a Card Reader or use a Data Cable or use Shareit or something like that to transfer your Data to your Windows and Then Access it.
I got a Better and Of course a Smart Way to do this with a help of a Simple app called Airdroid.And I bet you that It will the Best Android App you have ever seen.

Follow the Below Steps to Transfer your Android Phone to PC ::

1)Download the Airdroid App from PlayStore and install it.
2)Open the App and first Sign Up.You can Sign up using Google+,Facebook or Twitter also.
3)A small Window will appear asking for View all App and System Notifications on the Computer in real time.Click on the Enable Button.
4)Then your Mobile Accessibility Settings will be open.Under the S…